Tervion Ops

Bindery tools · early concept

Fold Register.

An independent design prototype proposed for Tervion Ops (tervionlabs.com). Prepress operators and booklet designers can trace a page through a folded sheet, check which way its head points and take one panel to the proofing table at its actual flat size.

Design proposalOpen the workbench ↓

Signature workbench

Flat sheet preview
Signature pattern
Sheet face
Cross fold / face A420 × 297 mm
Fold line↑ Page headSelected panel

Panel proof

Page 01 · Face A · Upright

210 × 148.5 mm / Row 2, column 2 / A3

Illustrative proof at flat size, before trim.

Fold notes

Worked sheet · A3 / 16 pages

What sits behind page 09?

A designer has marked the top edge of a full-page illustration on page 09 of a sixteen-page booklet. The person folding the dummy wants to pencil in that edge before any artwork is placed. Which panel takes the mark, and which page will carry it on the reverse?

Choose any number in the sheet map to load that panel in the workbench. The example uses Three-fold and A3. Its landscape sheet measures 420 mm across and 297 mm high. Four columns and two rows give eight panels per face. Read from the left of the face you are looking at, keeping the same long edge at the top.

Sheet map · column order at the bench
Face / rowCol 1Col 2Col 3Col 4
A · Top
B · Top
A · Bottom
B · Bottom

Select 09 in the top row, third column of face A. Its head points down. Then press B · Back to turn the sheet like a book cover. The same piece of paper reads 10 on the back, still rotated 180°. It is now in column two. Staying with column three on the back would take you to page 11.

Fold, measure, pull

Cross fold sequence

  1. Lay face A up and fold the top half behind the bottom half.
  2. Fold the left half behind the right. Page 1 faces up.

For the sixteen-page dummy, put face A up. Fold the left half behind the right, then the top half behind the bottom, then the left half behind the right again. Page 01 finishes on top.

Mark the head edge in pencil before you start so you can find it again when you unfold the sheet.

Measure the flat panel

On the sixteen-page A3 sheet, divide the parent width by four (420 ÷ 4 = 105 mm) and the height by two (297 ÷ 2 = 148.5 mm). The half turn changes the direction of the drawing. It keeps the panel dimensions at 105 × 148.5 mm. The same fold on SRA3 gives 112.5 × 160 mm on a 450 × 320 mm sheet.

On the bench · A3 / Cross fold · 210 × 148.5 mm per panel.

Pull the page 10 proof

With A3 active and 10 selected on face B, press Save panel SVG. The browser builds a single 105 × 148.5 mm drawing with the number, head arrow and signature mark turned together. Open fold-register-16pp-a3-b-p10.svg in a vector editor and check its document dimensions. Print at 100% on larger paper, then measure the rectangle before using it as a size reference.